Vi.Tel. Digital Spioncino EO358 Model

Vi.Tel. Digital Spioncino EO358 Model

Easy-to-assemble (without passing electrical wires and/or additional work) - more security at your home 

Available in various finishes.

Cod: EO358.40 Gold

Cod: EO358.12 Synced Chrome

Cod: EO358.30 bronzed

With the digital cue we can see the benefits of

a clear, enlarged image.

With the traditional pion the image is poor, the elderly see with difficulty on the outside and children cannot reach the eye because of the height.

The digital slide is turned on at the touch of a button and the large image immediately appears on the display.

BEFORE INSTALLATION:

Before inserting the batteries, make sure that you have connected the camera plug.

Installation:

1) Replace the traditional eavesper, with the digital "VI.TEL. digital pion, in the case of Missing the spion on the door drill a hole 14 mm in diameter at a height of 1600 mm.

2) Insert the camera's canon into the hole from the foreign side of the door and make sure that

the arrow on the lenses is pointing up "as a picture".

8) Cross the cable until you reach the infirm side of the door.

4) Fix the plate with the double-sided three screws on the inside of the door with the

up arrow.

5) Screw only and exclusively the locking barrel, to the threaded sleeve of the camera and tighten, This will permanently fix the plate at the door (Figure 2).

6) The camera plug must be fully inserted to the current socket at the back of the screen, the excess cable must be tied behind the small hook.

7) Hang the screen on the plate and fix the same with the screws "as photo".

Sheet:

Measurements: mm 135 x 85 x 24

Installable on ports: 55 to 110 mm thick

Door hole: mm 14 to 22

Cmos sensor: 0.3 mega pixels

Lcd screen: TFT 3.5"

Weight: 345g

Angle of view: 110 th

Power: 4 AA stylus batteries

Turn on: manual

Shutdown: Automatic after 10 seconds