Vi.Tel. Model EO378 Digital Spioncino

Vi.Tel. Model EO378 Digital Spioncino

Easy-to-assemble (without passing electrical wires and/or additional work) - more security at your home 

Available in various finishes.

Cod: EO378.40 Gold

Cod: EO378.60 White

Cod: EO378.12 Synced Chrome

With the digital cue we can see the benefits of a clear and enlarged image.

With the traditional popille the image is poor, older people see with difficulty on the outside and children can not reach the eye because of the height, The digital pople turns on simple-icing at the push of a button and immediately appears

large image on the display.

The battery housing is located sideways to the product, so the possible replacement of the batteries themselves, does not involve dismantling the screen.

BEFORE INSTALLATION:

Before inserting the batteries, make sure that you have connected the camera plug.

Installation:

1) Replace the traditional eavesper, with the digital "VI.TEL. " digital pion, in case of lack of the eavescue on the door drill a hole 14 mm diameter at a height of 1600 mm.

2) Place the camera's slide into the hole from the outside of the door and make sure the doorbell button is down, and adjust for the camera to be perfectly perpendicular (Figure 1).

3) Make the cable cross until it reaches the inner side of the door. 

4) Fix the plate with the double-sided three screws on the inside side of the door with the upward-facing arrow.

5) Screw only and exclusively the locking barrel, to the threaded sleeve of the camera and lock. This will permanently fix the plate at the door (Figure 2).

6) The camera plug must be fully inserted to the current outlet

Sheet:

Measurements mm 139 x 77 x 16

Installable on ports: 38 to 110 mm thick

Port hole: from mm 14 to 10 p.m.

Cmos sensor: 0.3 mega pixels

Lcd screen: TFT 3.4"

Weight: 290g

Angle of view: 110 th

Power: 4 AA stylus batteries

Turn on: manual

Shutdown: Automatic after 10 seconds